Things With Strings

After having all three layers done, I decided to try to get the middle layer (shallowest) to size using a router and template, then I would glue all three layers together and machine the outer two layers using the middle layer as a router follower bit against the middle layer. In short this turned out badly, as I broke the middle layer whilst trying to route the inside surface. Fortunately I was able to patch it up, and in the end the patch should be invisible, but I decided at that point that it was probably best to get the three layers glued together before I made an unrecoverable mess of things. glued and clamped I'm not 100% sure how I will shape it yet. Probably router plus jig for the outside and sanding drum for the inside. Part 2 is here

Things are moving a little quicker now due to being able to square-up the stock faster due primarily to a jig I made for that purpose, hence I managed to get two layers done for the banjolele this weekend. I'd planned to work on the banjo rim, but avoiding nail holes, knots etc. left me with insufficient pieces for an 11" rim, but plenty for an 8" rim. Each layer is quite different in density and cloud, but I'm hoping it will hold together and look decent. The layers were 1" deep, as opposed to the 3/4" of the first one I made. The first one was quite yellow in colour, and I think I'll use that as the middle layer. It will probably end up looking like a cheese sandwich. Two layers glued and clamped I'm now quite looking forward to the next steps which will involve ensuring each layer is flat and then gluing them together. I'm not sure yet whether I'll sand the layers flat or try to use the router, I'll have to sleep on it. Part 3 ...

Despite taking an unprecedented amount of care squaring the stock material and getting the angle on the mitre saw correct, the joints turned out pretty poor although it's difficult to see from the picture. banjo rim layer 1 However when driving home tonight I had a eureka moment and have gotten myself a solution. When it's dry, I will take a slice through a joint and insert a saw-blades thickness shim. Then I will let that dry and repeat the process for every joint. I may even use a darker colour to make it something of a feature. Sorted!

After a few practice attempts (aka false starts) at making rim segments last year, this weekend I had my first proper crack at it. The problems I'd run into previously were mainly due to starting off with non-squared stock material. This time I picked a ropey log from the pile of pallet wood I have (allegedly Mango, but could be anything) and squared it up. This particular piece was not the best, mainly consisting of knots, nail holes and worm holes and a little bit of wood holding everything together. I don't want to screw up on something that was too nice, but what started off as a fairly substantial piece only yielded enough wood to make one 12-segment layer for the banjolele. Anyway, once I'd squared up the stock, I needed to cut the segments at 15 degrees on the mitre saw. The calculation to get the correct angle to set the mitre saw for segmented is (360 / #segments) / 2 which is where the 15 degrees comes from in this case. First problem! My mitre saw had fix...