Skip to main content

Josh's Xmas Boost

It's coming up to Christmas, and what to buy for your daughters boyfriend? Hmm, how about making him a pedal for his guitar.

After much deliberation I decided on Tim Escobedo's Duende (MOSFET version) and drew up a super-compact perfboard layout...


I went straight into soldering without breadboarding, as the circuit is pretty simple, and luckily it worked straight away. Here's a picture after adding all the components to the board.


And here's a shot of the completed unit


In use, I found that I needed the volume control at about 1 o'clock before I could hear any difference, and I was expecting to hear something a bit earlier on the dial, but once above 1 o-clock, there is plenty of volume to be had.

Switching the device on does brighten the signal somewhat even at unity gain, and the device is very quiet in operation, No hiss, hum or buzz.

I wish I'd had a girlfriend whose dad made pedals when I was his age!




Comments

Popular posts from this blog

Vox Pathfinder 10 and Pathfinder 15 Simulation

I've got a Vox Pathfinder 10 amplifier that I bought a couple of years ago, and I love it. It's a great little amplifier, but I don't care for the distortion channel, it just sounds harsh to my ears. There are quite simple modifications that can be done to this amplifier to remove the clipping LED's and increase the boost of the clean channel (check out Ben Craven's mods  for details). I'd been considering doing some of these, but whilst researching the subject, I discovered that the currently out of production (as at Nov '18)  Pathfinder 15/15R generally receives a lot more love than the Pathfinder 10. I found schematics for both the PF15 and the PF15R online, and saw that there were a lot of similarities between the PF10 and the PF15, particularly the earlier non-reverb PF15. The PF15R (with reverb) is quite a bit different after the first two opamp stages. I thought I'd model both the PF10 and PF15 pre-amp stages in LTspice  to see how they compar...

Vox Pathfinder 15 Tremolo Repair

Last year, I snapped up a Vox Pathfinder 15 (non-reverb) combo amplifier from ebay. The seller was a charity shop, and the amplifier was listed as "untested", so I was taking a bit of a gamble, but figured I'd have a good chance of being able to fix it it it wasn't working, and cosmetically, it looked almost mint. When it arrived, I plugged it in, and as you guessed, it was not working. Barely any sound, and what sound there was was horribly distorted. One thin I did notice was the the power on LED was not aligned correctly with the hole in the back panel, so I did quickly took it apart, and realigned the potentiometers and LED indicator, but didn't have a look in detail at the circuit. I put it back together, but the problem remained. My guess was that the problem was the famous "cambridgitis" (just google that term and you'll find all about it). Basically, a problem where the optocoupler that controls the tremolo circuit fails. A common failure...

Marshall Lead 12 Preamp Simulation

Having already modelled the preamp stage of the  Vox Pathfinder 10, 15 and 15R  respectively, and noted the similarities circuit-wise between the PF10 and the PF15, I discovered another much-loved practice amp with a similar preamp stage - the Marshall Lead 12. I should say, before going any further, that there are huge differences between the power amp stages. The PF10 uses a TDA2030A chip amp whereas the Lead 12 uses discrete components. The chip amp power stage on the PF10 shouldn't colour the tone much, but the discrete one in the Lead 12 most likely does contribute to the overall tone of the amplifier. A simulation of the preamp stage with the Treble, Bass and Mid controls at 50% and the Gain control at 0%-100% gave this Marshall Lead 12 Preamp Simulation Marshall Lead 12 preamp simulation, Gain 0%-100%, TMB @ 50% Vox Pathfinder 10 preamp simulation (overdrive engaged) Vov Pathfinder 10 preamp simulation, Gain 0%-100%, T+B @ 50% Comparing the two, ...